TCA xmember centers

[stuart]

Can someone give me the pivot centers of the TCA on the standard xmember and also a hight from a datum. Also any advice on changing the width and height of it for rallying on gravel

[Jimmy Hiddlestone]

From memory stock is 591 centre to centre, 52mm down from underside of chassis mounting point.

Ford Rally Prep manual - out 1/4" (6mm) and up 1/4" (6mm) from stock datum to reestablish stock camber when raised.

I currently have set at 10mm out (601 centre to centre) and 10mm up (42mm down from underside of chassis mounting point) - this eliminated a bump steer/roll positive camber issue I experienced with a lowered height front.

[stuart]

Thanks