pinto twin 40s
Posted: Tue Dec 10, 2013 8:38 amhi, im afer a set of twin 40s on a pinto manifold even a single 45 on a lynx manifold, cheers
RS Motorsport :: Classic Speed Restored
Carrying on from \"The Works Escorts\" forums of years past, RS Motorsport is dedicated to those small Fords from the Golden Era of Motorsport, namely the 60's, 70's and 80's.
https://www.rsmotorsport.com.au/forums/
pinto twin 40s
https://www.rsmotorsport.com.au/forums/viewtopic.php?f=7&t=5360
Page 1 of 1
Posted: Tue Dec 10, 2013 8:38 amRe: pinto twin 40s
Posted: Tue Dec 10, 2013 1:20 pmIf you can't find twin 40's don't bother with the single, they don't work very well. The V6 capri carb works better on the standard manifold. Unless you're chasing clearance for a strut brace....
Re: pinto twin 40s
Posted: Tue Dec 10, 2013 2:46 pmyea you've been the 2nd one to tell me that, and thats why im looking 40s wanting strut brace thanks
Re: pinto twin 40s
Posted: Tue Dec 10, 2013 8:07 pmi have a set send me a pm
Re: pinto twin 40s
Posted: Wed Dec 11, 2013 12:08 amDon't touch the single side draft manifolds, they flow less air than a standard inlet.
I have a whiteline strut brace for $120 to suit a mk2 Escort.
I have a whiteline strut brace for $120 to suit a mk2 Escort.
Re: pinto twin 40s
Posted: Wed Dec 11, 2013 7:46 amsteve you've pm, thanks maxrs but iv already got on, and thanks for the advice cheers
Re: pinto twin 40s
Posted: Fri Dec 13, 2013 5:05 pmbump
Re: pinto twin 40s
Posted: Sat Dec 14, 2013 8:03 pmI have a pair 40DCOE here in WA (sequential numbers), plus a spare 40DCOE bare body and a load of venturis/chokes etc.
I have a twin DCOE pinto manifold somewhere in the shed too.
Drop me a PM if interested
Paul.
I have a twin DCOE pinto manifold somewhere in the shed too.
Drop me a PM if interested
Paul.
Re: pinto twin 40s
Posted: Sat Dec 14, 2013 8:18 pmRe: pinto twin 40s
Posted: Sat Dec 14, 2013 8:20 pmi have a set of 40 dhla delorto,s on a 1600 kent manifold
Re: pinto twin 40s
Posted: Sun Dec 15, 2013 7:13 pmCleaned with a unhealthy dose of carbie cleaner and assembled:
Re: pinto twin 40s
Posted: Mon Dec 16, 2013 5:44 pmI have linkages to suit twin 40's, with a bracket to suit a standard accelerator cable.
Re: pinto twin 40s
Posted: Mon Dec 30, 2013 9:39 pmthanks everyone all sorted