pinto twin 40s

[eamonlad]

hi, im afer a set of twin 40s on a pinto manifold even a single 45 on a lynx manifold, cheers

[ozstang65]

If you can't find twin 40's don't bother with the single, they don't work very well. The V6 capri carb works better on the standard manifold. Unless you're chasing clearance for a strut brace....

[eamonlad]

yea you've been the 2nd one to tell me that, and thats why im looking 40s wanting strut brace thanks

[gen mk 1rs2000]

i have a set send me a pm

[maxrs]

Don't touch the single side draft manifolds, they flow less air than a standard inlet.
I have a whiteline strut brace for $120 to suit a mk2 Escort.

[eamonlad]

steve you've pm, thanks maxrs but iv already got on, and thanks for the advice cheers

[eamonlad]

bump

[PaulMK1]

I have a pair 40DCOE here in WA (sequential numbers), plus a spare 40DCOE bare body and a load of venturis/chokes etc.

I have a twin DCOE pinto manifold somewhere in the shed too.

Drop me a PM if interested

Paul.

[PaulMK1]

[gen mk 1rs2000]

i have a set of 40 dhla delorto,s on a 1600 kent manifold

[PaulMK1]

Cleaned with a unhealthy dose of carbie cleaner and assembled:

[maxrs]

I have linkages to suit twin 40's, with a bracket to suit a standard accelerator cable.

[eamonlad]

thanks everyone all sorted