Air filter

[marty]

Hi guys

I'm after an air filter to bolt onto the exhaust port on my sand blasting cabinet so I can filter the crap that comes out so I don't inhale it.
The exhaust port is 64mm in diameter.
It can be some old heap of crap original filter you have lying around that you don't want, even if the diameter is not an exact match I can knock something up to fit.
In Brisbane.

Cheers
Marty

[gen mk 1rs2000]

marty do some research
sandblasting causes radioactivity !!!
even wearing a paper mask you will
cough like a teenager smokin dope
small cabinet sandblasters are bad
if you dont beleive me try putting a tv or radio
next to the sandblasting unit
the static electricity is like lightning

[marty]

Static electricity not radioactivity. I do worry about electromagnetic radiation so I use my mobile as little as possible, but with the level of electromagnetic radiation spiralling out of control we'll all be f&@ked.
Don't believe in paper masks as they do jack s@!t.
I'm very concerned about my health so I use a 2 stage filter whenever I'm grinding or painting.
I want to filter the exhaust from the cabinet to prevent particles from entering the air as well as wearing my mask to be sure. Don't use sand or glass, I have garnet.

Thanks for your concern.

[marty]

I should also mention I'm after an air cleaner not a filter. You remember the old style cleaner that had the horn looking in-take.
The idea being that the carby plate part will connect to the cabinet exhaust port, the filter in the air cleaner will filter the majority of the crap and I can connect the vacuum cleaner to the in-take of the air cleaner so the vacuum can filter the remaining.