Sand Blast Grit
Posted: Mon Sep 13, 2010 7:13 pmRespirator - tick
Keep it moving - tick (will not be doing flat areas anyway)
Think I need a new regulator/water separator as after a while it shoots water
RS Motorsport :: Classic Speed Restored
Carrying on from \"The Works Escorts\" forums of years past, RS Motorsport is dedicated to those small Fords from the Golden Era of Motorsport, namely the 60's, 70's and 80's.
https://www.rsmotorsport.com.au/forums/
Sand Blast Grit
https://www.rsmotorsport.com.au/forums/viewtopic.php?f=2&t=3479
Page 1 of 1
Posted: Mon Sep 13, 2010 7:13 pmRe: Sand Blast Grit
Posted: Mon Sep 13, 2010 7:39 pmPosted: Mon Sep 13, 2010 7:46 pmso a bag of dry paving sand might be the go then?
Respirator - tick
Keep it moving - tick (will not be doing flat areas anyway)
Think I need a new regulator/water separator as after a while it shoots water
Respirator - tick
Keep it moving - tick (will not be doing flat areas anyway)
Think I need a new regulator/water separator as after a while it shoots water
Posted: Mon Sep 13, 2010 8:13 pmPosted: Mon Sep 13, 2010 8:19 pmPosted: Mon Sep 13, 2010 8:48 pmTry some bead if you can find it.
Quite a few years ago now I did some wheels at a friend's place. He had 2 blast cabinets made from ex high-school chem class fume cabinets!. They used the bottom of old milk crates (to rest the parts on) over a hopper to collect the blast bead. One of the cabinets used clean bead and one used 'old' bead. The old beads were used to do the major cleaning, then we finished off with the new stuff. Came out a million $.
If there's some way to contain the blast material, you can reuse it.
Quite a few years ago now I did some wheels at a friend's place. He had 2 blast cabinets made from ex high-school chem class fume cabinets!. They used the bottom of old milk crates (to rest the parts on) over a hopper to collect the blast bead. One of the cabinets used clean bead and one used 'old' bead. The old beads were used to do the major cleaning, then we finished off with the new stuff. Came out a million $.
If there's some way to contain the blast material, you can reuse it.
Posted: Mon Sep 13, 2010 9:27 pmPosted: Tue Sep 14, 2010 5:26 pmPosted: Tue Sep 14, 2010 7:22 pmPosted: Tue Sep 14, 2010 9:20 pmPosted: Wed Sep 15, 2010 6:38 amPosted: Wed Sep 15, 2010 4:36 pmJust contacted them. they have plenty of stuff...could just do with more customer oriented workers!!!!
Posted: Fri Sep 17, 2010 10:54 pm