
I have access to a lathe the only trouble i have is the smallest boring bar we have is for a 30mm starting hole. This is to big for the bearings i want to use also have nothing to put the circlip retaining groove in.
Mik
Carrying on from \"The Works Escorts\" forums of years past, RS Motorsport is dedicated to those small Fords from the Golden Era of Motorsport, namely the 60's, 70's and 80's.
https://www.rsmotorsport.com.au/forums/
https://www.rsmotorsport.com.au/forums/viewtopic.php?f=2&t=2941