YB Radiator hose
Posted: Wed May 30, 2012 7:52 pmwhat do people use for the top radiator hose when replacing a pinto with a YB in a Mk2 escort?
RS Motorsport :: Classic Speed Restored
Carrying on from \"The Works Escorts\" forums of years past, RS Motorsport is dedicated to those small Fords from the Golden Era of Motorsport, namely the 60's, 70's and 80's.
http://www.rsmotorsport.com.au/forums/
YB Radiator hose
http://www.rsmotorsport.com.au/forums/viewtopic.php?f=9&t=4661
Page 1 of 1
Posted: Wed May 30, 2012 7:52 pmRe: YB Radiator hose
Posted: Wed May 30, 2012 8:34 pmspeedflow
Re: YB Radiator hose
Posted: Wed May 30, 2012 10:19 pmJust use the 2WD t/stat housing and go do down to Repco and get two hoses with a 90degree bend in them and either turn up an alloy joiner or you can actually buy them and just fiddle with the lengths until it fits
Going Speedflow can have it's own dramas as Speedflow hose doesn't have enough flex in the hose sometimes when you are using short lengths
Danny
Going Speedflow can have it's own dramas as Speedflow hose doesn't have enough flex in the hose sometimes when you are using short lengths
Danny
Re: YB Radiator hose
Posted: Wed May 30, 2012 11:35 pmCheers Danny
I thought that might be the case but thought i ask just in case
Close to starting now!
Neil
I thought that might be the case but thought i ask just in case
Close to starting now!
Neil