RS Motorsport :: Classic Speed Restored

Paul,

Keep us posted.

Ideal spot to do a Resto buildup here.

Plenty of knowledgeable bods around

Cheers Roger.

Call me a long time reader and first time (topic) poster

A few guys on here have been helping behind the scenes so I thought I'd start posting to show off their handy work

More to come.........

OK, some pics of the new sections welded in by Mark (2quick4u) over the past few months - cheers mate .

Slow going as we're only doing a day here and there but the results are well worth the effort. Basically all that has been done once welded is to have the welds knocked down and primed to prevent unnecessary rusting.

All replacement sections were donated from other shells and trimmed to fit. Both lower rear quarters were rotten (inner, outer AND the lower rear wheel well) so all the individual replacement sections were unstitched to be re-installed.

The heater area was rusted through beneath the fan shroud so this too was replaced with a donar section and a replacement plenum cover installed. I have left the grill section below the windscreen free to be riveted on as it will make accessing while painting much easier.

The next sections to tackle are the "C" pillars as the've gone in the usual places adjacent to the rear side windows and in the top corners of the boot opening [V]

Stay tuned.......

Gold is the way to go mate

Gold wheels on white cars should make a comeback

gold here too dude

For me, I'd go with charcoal. Would suit the white car with the black timmings I reckon. My 2c worth anyway.

Black here

Not a daily driver so gold shouldn't pose a problem

Gold on the white REX looks the bizz

I could have helped out. But am in Melbourne Not Adelaide.
Sorry