RS Motorsport :: Classic Speed Restored

hi guys heres my new rs2000 4 door auto thought id throw some pics up just picked her up needs a clean before anything

and couple more

sorry bout the crappy pics will give a clean up tommorow and put up some better ones

Looks like a good one.

What are the plans?

Cheers

Matt

First off give her a good clean and take it back to original colour "burnt orange" I'd like to keep the auto try and keep it original but gotta find out how much power the lil auto can take before I get to excited engine wise I have a sierra 5 speed in the shed that would fit nicely though

good to see another more door RS rescued. Try digging up a copy of David Vizards book "How to modify Ford SOHC engines" - has a section on building C3 auto for high output engine

thanks jimmy il be sure to chase it up

Wow, such a rare car. Congratulations. I hope you're inclined to make it as stock as possible, as it would be much more interesting to enthusiasts and valuable like that. If it were mine I'd probably put in a 134 cam and some head work to up the torque to compensate for the auto transmission.

A note regarding the Vizard book. The chapter on the auto trans is titled "Building a C3 Automatic Transmission", but as best I can tell from lightly skimming through it, every other reference is to C4. There are photos showing some of the differences between the parts used in the "4 cylinder applications" and the V-8s.

Good luck with it.

yeh gonna try to keep it as stock as possible besides engine internals just downloaded the vizard book says the c3 is rated to about 170bhp wich isnt to bad so i guess itl be a see how it goes experiment haha

guys could someone post some pics of an rs2000 interior mainly door cards im pretty sure mine arnt genuine ;(

Whats your email address, I can send you some photo's of door cards.

Thanks mate it's beshy642@live.com.au

Good to see the car has found a new owner.

I looked at this car a few years ago, but the owner at the time wanted big dollars for it.

The auto will make a good little run around. I have a few left over RS2000 parts if you need bits to finish it.

Thanks glen must thank you for putting me onto it.. Il try and get as much out of the engine and auto as I can so it can back itself at the lights haha

ok guys its starting to get some where heres a few updated pics of the rs

few more

and heres a few of my old mans monza red rs2000 coupe picked it up from the panel beaters last week

ok guys heres a few more all the rust has bein fixed rear panel has bein replaced and remade the fueler behind the number plate... has bein sprayed in primer atm and all sound deadning is done
was hopeing id have it done before christmas so i can start putting it back together over chrissy hols nut unfortunatly not :/

..

Wow, great work and effort!
My projects are nearing fifteen years and you would not be able to tell what I've done