Page 1 of 1
alloy hub dimensions
Posted:
Tue Oct 07, 2014 11:05 pmby jpayne
Guys,
Could anyone with +10mm wider alloy hubs or who knows give me a dimension so I can determine if I have standard or wide track hubs? as wheel are rubbing on strut and need to know If I have silly wheels wrong offset hubs or both.
please.
Justin
Re: alloy hub dimensions
Posted:
Thu Oct 09, 2014 9:01 pmby mickas
Which measurement? From where to where?
Re: alloy hub dimensions
Posted:
Thu Oct 09, 2014 11:28 pmby jpayne
Yeah exactly? I'm guessing from rear bearing land to hub face? if they are +10mm it should show there.
Where are they bigger?
Cheers
JP
Re: alloy hub dimensions
Posted:
Fri Oct 10, 2014 7:21 amby ozstang65
You'd want to measure from the face the rotor bolts to, to the face the wheel sits on. I have a set but they're inaccessible atm. Stephen from SMCKA might be able to help.
I could probably dig out the capri hubs and measure them, the new ones were 10mm wider.
Re: alloy hub dimensions
Posted:
Fri Oct 10, 2014 8:07 amby dingo_boy
Justin,
I suggest sending Gartrac an email as they sell both types and are very good in providing information such as this. Otherwise I have the wider hubs on my car but the car is stored north of Adelaide and I won't be up there to visit it for a few weeks if you can wait that long.
Cheers
Justin
Re: alloy hub dimensions
Posted:
Fri Oct 10, 2014 6:04 pmby ozstang65
The standard Capri ones are 52mm from the face the rotor bolts on, to the face the wheel mounts to.
Re: alloy hub dimensions
Posted:
Fri Oct 10, 2014 6:23 pmby jpayne
Thanks guys,
Thanks OZs
Will check mine out.
Cheers
JP
Re: alloy hub dimensions
Posted:
Fri Oct 10, 2014 8:14 pmby mickas
61mm from rotor bolt up face to rim bolt up face.
GRP4 fabrication hubs