Page 1 of 1
Wheels
Posted:
Wed Apr 02, 2014 7:22 pm
by wannamk1
HI All
Looking at some JBW minilights...
wood they fit under my std mk1 gaurds?
wheel size
Size: 7 x 13
PCD: 4-108
Offset: ET-7
Fitment: FORD - RWD
if anyone runs a set is this correct offset??
cheers
Re: Wheels
Posted:
Wed Apr 02, 2014 7:29 pm
by Miniliteman
Hello,
in my experience no, they will not fit.
Grtz, Leon.
Re: Wheels
Posted:
Thu Apr 03, 2014 4:37 am
by wannamk1
hi leon
ok thanks for that, would you tell me what would and best offset to use?
I like the look of the minilites with a bit of a dish!
cheers
Re: Wheels
Posted:
Thu Apr 03, 2014 8:20 pm
by Miniliteman
Hi,
the only wheel that I know that fit is an original (mag) Minilite 7x13.
That's an ET5 wheel plus the edges of the wheel are straight, not curved so the total width of the wheel is also smaller.
Superlite 7x13 ET-7: total width: 200 mm, inset: 93 mm -> outset: 107 mm .
Minilite 7x13 ET5: total width: 194 mm, inset: 102 mm -> outset: 92 mm .
Grtz, Leon.
Re: Wheels
Posted:
Fri Apr 04, 2014 3:00 pm
by wannamk1
HI Leon
Cheers
Re: Wheels
Posted:
Sat Apr 05, 2014 10:59 am
by what?
I have 13x7 -7 they "fit"with a 175 50 13 tyre. Not an ideal setup for performance applications but would be ok for a cruiser
Re: Wheels
Posted:
Sat Apr 05, 2014 8:11 pm
by ozstang65
These are 13x7, +4 offset with 175/60's. Front and rear lips rolled and -4 camber on Capri struts/hubs which pulls the tops in a bit. Standard guards.