Page 1 of 1
Type 9 Top Cover Gasket
Posted:
Thu Jul 04, 2013 11:31 amby MK1_Oz
Is the T9 top cover gasket available within Australia or do they need to be bought from OS? Burton is cheap but expidited freight is high.
Too fiddly to make a decent one
EDIT: Eurospeed??? Will ring them
Re: Type 9 Top Cover Gasket
Posted:
Thu Jul 04, 2013 3:27 pmby mickas
Three bond...
Re: Type 9 Top Cover Gasket
Posted:
Thu Jul 04, 2013 4:20 pmby MK1_Oz
Re: Type 9 Top Cover Gasket
Posted:
Fri Jul 05, 2013 9:32 amby Danny M
Just get yourself a sheet of 0.4mm gasket paper and use a small ball pien hammer and tap out a gasket on the top of the gearbox
You must use a gasket as the housing flexes and the sealing face between the housing and the top frets and silicone or Three bond will leak!
Re: Type 9 Top Cover Gasket
Posted:
Fri Jul 05, 2013 9:46 amby MK1_Oz
OK will try that next time. Mr Cogan has fixed me up this time
Re: Type 9 Top Cover Gasket
Posted:
Fri Jul 05, 2013 11:05 amby mickas
3 bond never leaks... unless your an idiot... It flexes...
Re: Type 9 Top Cover Gasket
Posted:
Fri Jul 05, 2013 11:33 amby Danny M
Bullshit
Re: Type 9 Top Cover Gasket
Posted:
Fri Jul 05, 2013 3:24 pmby mickas
Re: Type 9 Top Cover Gasket
Posted:
Fri Jul 05, 2013 11:45 pmby Danny M
No wonder you work on Holdens ya rough bastard
Re: Type 9 Top Cover Gasket
Posted:
Sat Jul 06, 2013 7:44 amby mickas
Nothing ever stopped a dirty old pinto/cosworth leaking
Re: Type 9 Top Cover Gasket
Posted:
Sun Jul 07, 2013 12:04 amby Danny M
Mine only leaks when it's stopped
