Page 1 of 1
Dyno tuning in SEQ
Posted:
Thu Apr 12, 2012 3:11 pmby DazzaW
Hi guys,
Can anyone recommend a reputable dyno tuning facility in SEQ. I am on the Brisbane south side.
Preferably someone experienced with turbo'd Ford fours (a pinto in this instance) and Haltech management.
Cheers, Dan
Re: Dyno tuning in SEQ
Posted:
Fri Apr 13, 2012 5:21 pmby Darren W.
Not on the southside, but Jim Milliner at Smart Automotive Services should be able to help. Been around for ages and now into Motec. Fixed my weber 44IDF pinto to perfection, not cheap either but you get what you pay for from my experience.
23 Stone Street, Stafford QLD 4053 (07) 3856 3883
Re: Dyno tuning in SEQ
Posted:
Sat Apr 14, 2012 7:18 pmby rs turbo
hi mate call jon at next up performance , on 0421 543 553
he tunes my escort and never had any dramas just say that Aarron Hodges sent you and he will look after you ..
Re: Dyno tuning in SEQ
Posted:
Thu Apr 26, 2012 3:26 pmby DazzaW
Thanks guys,
I appreciate the input. I am having trouble with boost control - the previous owner fitted a bleed valve in the waste gate actuator line (not nice) and given that I am running a Haltech PS1000, I think it is only fitting that a BCS be fitted and driven by the ECU...
Cheers again.
