Car Puter
Posted: Sat Mar 28, 2009 11:18 amI've been slowly building this up. After wrecking a few motors because of poor AFR and not being able to check it at the track I decided to invest in a Innovate LC1 wide band O2 sensor. I also bought a SS4-I as part of the kit. This has 4 inputs that can be configured as analogue or dig inputs. These inputs can be displayed and logged on a computer along with the AFR. So that is what I have done.
Pentium 800Mh processor ( yes it is slow)
512 ram
16G Compact flash card as hard drive.
Graphics card with s-video out.( this will be removed when I get a decent touch screen)
7 inch analogue monitor.
Mini-ITX M2 power supply
In testing it seems to work well. I need to take it to a track to really test it.
Pentium 800Mh processor ( yes it is slow)
512 ram
16G Compact flash card as hard drive.
Graphics card with s-video out.( this will be removed when I get a decent touch screen)
7 inch analogue monitor.
Mini-ITX M2 power supply
In testing it seems to work well. I need to take it to a track to really test it.